How to browse the internet with any decoder at 5MB per second free

Connection Requirements and
Overview
Connection Requirements
SPLITTER
LINKSYS CABLE MODEM
RJ – 45 NIC Cable
Ethernet Cable
Router(WIRELESS OR WIRED if
you intend to use more than
one pc)
DECODER(mytv, hitv, dstv,
daarsat etc)
Coaxial to RJ-45 converter or
adapter
COAXIAL CABLES
Overview
SPLITTER
There are many types of
Satellite Decoder Splitter, you
buy your favorite at the shops
where it ’s been sold What do
we use the Splitter for? This
enables you to create a parallel
connection for the coaxial
cable (this is the cable that is
used to connect your decoder
to the TV and as well as the
decoder to the Dish hanged
outside).the splitter will share
the signal that comes from the
dish outside between the TV
and the Router cable modem,
which will convert the signal to
an internet signal
LINKSYS CABLE MODEM
Definition of a Cable Modem: A
cable modem is a device that
delivers high-speed Internet
connectivity via a cable
television company which
serves as the Internet service
provider (ISP). A cable modem
requires a subscription to
cable Internet service, and will
not function by simply
connecting it to a cable TV
(CATV) feed. Externally, a cable
modem resembles a DSL
modem. The coax cable that
brings in the digital CATV
signal provides a channel for
upstream and downstream
Internet service. This does not
interfere with television, as
there is plenty of "real estate"
or bandwidth space on the
coax cable to handle both TV
and Internet signals. Why
Linksys Cable Modem: The
Linksys Cable Modem does not
require you to pay any
additional separate monthly
subscription to the cable
company, you only need to
connect it with your current
subscription with your satellite
cable TV provider which will
only work with a Coaxial Cable.
RJ – 45 NIC Cable
This is a typical networking
cable which we will use to
network all the network
devices that we have listed
above such as the Router
(Cable Modem), we will use it
to make a connection from the
Router to the computer to
transmit internet.
Ethernet Cable
Ethernet cables connect
network devices such as
modems, routers, and
adapters. They transmit data
using the Ethernet protocol.
Most Ethernet cables have
RJ-45 jacks on both ends, each
with 8 pins. (They look similar
to telephone jacks, which use
4 pins or 6 pins.)
• Equipment using an Ethernet
cable is referred to as wired.
• Wireless equipment uses
radio waves in place of some
(or all) Ethernet cables. A
network device that uses both
Ethernet and wireless
connections is usually called
just wireless.
The Physical Ethernet Cables
• Use Cat 5 cables. (Cat 5 is a
measure of quality, meaning
that it supports traffic up to
100 MB / sec.) These are also
called 10/100 Base-T Cat 5
cables.
• Some Ethernet cable wires
crises-cross internally, others
are straight through, meaning
that pin 1 is wired to pin 1 on
the other end, etc. A port
(socket) for a straight through
Ethernet cable is sometimes
called an uplink port. If you
aren't sure about a cable, and
you can see the inside wires'
colors, hold the two ends of
the plugs up, so the same side
of the plug is facing you.
Router
A router is used to transmit
internet to more than 1
computer system on a
network setup, this enables
you to network your
connection to other system
(PCs). This is also known as
cable modem.
The connection runs the
incoming cable connection to
an external cable modem,
which has an Ethernet
connection to a router, which
then connects
DECODER
A decoder is a device which is
used to decode the satellite
signal receive from the satellite
dish into a video, the decoded
signal converted into video is
what we receive on our TV,
The purpose of we connecting
to the internet with a decoder
is to convert your decoder to a
Modem, a cable decoders is a
modem because it modulates
and demodulates, but it also
functions as a tuner, a
network bridge, an encryptor
etc.
To connect your PC or laptop
to a decoder to access the net,
you do not use a serial port as
with dialup modem.
COAXIAL CABLES
This connect the decoder to
the splitter and one end of the
cable goes into the TV while
the other end goes to the WAN
port of the router (Linksys
Router)
Things to take Note before
buying all the equipments
required for setup:
• I always recommend
running a router between a
cable modem and a PC because
a router not only allows more
than one PC to be connected,
but also provides a robust
hardware firewall that helps
shield your PC(s) connected to
it from internet – based
attacks.
• You can directly connect PCs
to a cable decoder using USB; I
do not recommend that option
because it precludes using a
router (cable modem)
• Some cable modems have a
built – in router, in which case
you don’t need to purchase a
separate one. If your computer
doesn ’t include an Ethernet
adapter built into the
motherboard or a separate
Ethernet card, you can install
an Ethernet card into an
available internal expansion
slot or use a USB – based
Ethernet adapter instead. I use
a USB - based Ethernet adapter
on my HITV decoder.
• The cable modem connects
to the CATV network using the
same coaxial cable connection
as your cable TV.
The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from
your dish to your satellite
decoder splitter( i.e the “in” part)
and then connect one cable from
the first “out” port to your
decoder and the one from the
second port to your Linksys
modem; the cable can be
purchased from any shop where
they sell cable
decoder while one of the other
coaxial cable cords is connected
to your television to watch
satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable
cord from the splitter to WAN
port of your router (Linksys
Router)
Step 3
Coaxial Cable cord
If your cable modem does not
have an inbuilt router facility, you
will need to connect your cable
Modem to the CATV network of
your router using the same
coaxial cable connection as your
TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from
the router to your computer
system, which can stand as a
client if you are using only one
computer or server if you are
networking more than one
system, make sure that your
computer has an inbuilt Ethernet
adapter on the Motherboard or a
separate Ethernet card, you can
also install an Ethernet Card into
an available internal expansion
slot or you can alternatively use a
USB – Based Ethernet Adapter
instead. In our connection we
use a USB –based Ethernet
adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router
there are several ports, port 1 – 4
Stand as the LAN(Local Area
Network) Port which can be used
to connect 1 -4 CPU to the router
with an RJ -45NIC Cable, in most
cases the cables comes with the
router when you purchase it.
Connect 1 -4 CPU to the LAN Port
of the router with your RJ -45
Cables, please don ’t mistake it
with the Ethernet cable, as is only
to be used to connect the
computer which is the server to
the Router for network routing
and also note that each of the
CPU that connect to the Router
LAN Port with the help of RJ-45
must have an inbuilt Network
card install in them, while the
server should have an Ethernet
card adapter install on the board
as mentioned earlier.
Step 6
The fifth port of the Linksys
Router which stand as the WAN
Port (Wireless Access Network)
Connect the second coaxial cable
that comes from the splitter to
the WAN Port of the Router, but
note that you need a converter
which is an adapter that convert
the coaxial cable to RJ -45 cable
since the Router WAN port does
not have a direct port for a
coaxial cable
Step 7
The sixth port of the Linksys
Router which is called the
UplinkPort, the port can be
connected to a Hub or a Switch
to enable additional users or
computers within the network
range to share with the internet
of your decoder via wireless
access
System Configuration Steps
1. Start up your computer that
we call the server, and click on
the start button and then click on
control panel
2. Click on Network connection
from the control panel tab
3. Click on Create a new Network
connection from the Network
Connection from the control
panel tab
4. Select the Connect to the
Internet Radio button and then
click on Next button
5. Select the Choose from the a
list of Internet Service providers
[ISPs] radio button and click on
Next button
6. Finally Click on Finish button,
Then the connection will then
come up
7. Open up your Internet
Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility
(1) Windows Operating System
(2) Linux Operating System
What can this Internet
Technology be used for? (1)
Personal Usage
(2) Group Usage in an
Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email
Service and Internet Calls
Benefits of using this Technology
(1) Pay only monthly subscription
for your cable TV and it covers
the Internet Bill (2) Browse with
a very fast internet speed of 4
mbs download speed
(3) Connect large number of
Computer systems with the help
of a Network devices
(4) Connection configuration is
simple and easy
(5) You can watch Cable TV while
browsing the internet at the
same time without conflict
(6) No downtime for internet
connection except if your
subscription as elapsed, or one
of the connection devices gets
faulty.
(7) You can buy two decoders to
setup a mini cyber café and cable
TV football center at the same
time

i got this manual 4rm a friend n i paid so mucg 4 it so let us work on tis as a team

thanks broda
oga u toooooooo good ohhhh u tooooooo good

@ashawo thanks 4 d info. So how do we start.

Abou start 1st

Person don try am?

Mehn i'm half way

i need a list of d devices in short form.

or is there anybody living close 2 ashawo,so as to do it 2geda cos 2 heads are beta dan one.

@all wht do u think?

thanks

Anybdy wud testimony?

Wen things involv cash we al run

Hacklord wrote:

Wen things involv cash we al run

NIAJARIANS NEVA WANT TO SPEND BUT WANT TO CHOP...........@ SOME SITES THIS INFO IS NOE EVEN FREE

Good job man that is very great....and can this work for we people in Ghana....and is there any software that u will need to finish this..cuz i have tried searching for this manual and most people says there is software attach to it...but i have the manual of this also but i have not try it yet....so have u try it and work for u...?

ashawo dont let dis thread die where are u? Lets know whats up.

guy u are three much

Sire is it still workinga and how can we get this stuff

where can i find the linksys cable modern

hello house has any one tried this yet? if any please say it

guy good job

keep it up

this is a wonderful combination of devices, technology is really going haywire.Well done folks for posting this manual, KEEP IT UP.

how can i get this software since am in Ghana now..

can some one mail me if i can get the software free browisng without pay anything whiles using my modem .u can mail me if u can help me get [You must be registered and logged in to see this link.]
thans

Welcome to the Official Tutorial Page for " How to Browse the Internet for Free on your PC using DSTV, HiTV, DAARSAT Decorder etc as a Modem ".

This Tutorial has been on the Internet almost on every website now but no one is as comphrensive as this one is gonna be.

Lets get Started, I will try my possible best to make everyone understand it without much Reading and Hassle. Make Best Use of this Tutorial because i have decided to show it our when others are Packaging it into an Ebook and it goes for nothing less than N5,000.

LITTLE EXPLANATION.
Cable TV make use of what is called Broadband Network, meaning the bandwidth of the connection is Split to simultaneously carry Man signals at different frequencies, for data networking (Internet access) purposes, cable system typically allocates one channel worth of bandwidth which is used to access the Net.
That means you can convert your HITV, DSTV, CTL, MYSPACE etc decoder to a modem to access the Internet. You can also connect your laptops and desktops to browse the Internet at a speed between 6mbps and 8Mbps, over 100 times which is far better than any Dial up Connection e.g Starcomms, Multilinks and others.

MATERIALS NEEDED.
Before you can be connected to the Internet Free of Charge though any of DSTV, HiTV etc Decorder, You need the Material below, Name & Image Inclusive!:
» Click on any Image to Bold it.

1. Your Decorder! It might be that of Dstv or HiTv, Just anyone.




2. Cable Modem.


3. Splitter.


4. Coaxial Cable.


5. Rj 45 Internet Cable.


After Getting all this Materials, Then you are Ready to Browse Free Using your Decorder!

INFO: To get Quality and Cheap Material/Equipment, Visit Computer Village, Ikeja, Lagos.

PROCEDURE FOR CONNECTION
This is the Most Important Step, Pls Follow it Careful and i believe it will work for you also. Lets get Started.

1. Connect the Coaxial Cable from the Coaxial Port at the back of the Decoder to the Splitter.

2. Connect another Coaxial Cable from the other side of the splitter to the Coaxial Port at the back of Cable Modem.

3. Connect one end of the Rj-45 Cable to the jack of the Cable Modem and the other end of the cable to the Ethernet port of your Laptop or your Desktop PC.

4. Turn on your Decoder and also turn on the Cable Modem.

Thats All, Is that not very Simple? I know you Understand every bit of it, Now lets Proceed to the Browser Configuration Stage.

CONFIGURE YOUR BROWSER TO WORK WITH THE DECORDER
Now we are 95% done, Just Configure your Browser with the Below IP and Port and you can Start Surfing the Internet at an Unimaginable Speed of 8mbps all for Free, Now Open your Mozilla or any other Browser and configure with this:

HTTP proxy or IP: 127.0.0.1
PORT: 8080

or select Auto Detect Proxy and you are Ready to Browse. Dont know How to Configure your Browser? Click Here

Thats All... Goodluck! Pls dont Forget to click on Our Share Button, May God Bless us all.


ADVANTAGES OF USING YOUR DECORDER TO BROWSE THE INTERNET

1. Internet access & Cable TV Access Charges are taken care of in your monthly subscription payments .i.e . You dont have to pay Extra Fee to Access the Internet, with your Decorder you can browse the Internet 24/7 and still pay the same amount you have always pay to your Cable Network.

2. The Speed of the Internet is enourmously Fast, It will surely blow your Mind just like Swift 4G did to me, Am loving it.

3. The Internet Access does not affect your Cable Stations, this means that you can watch & browse simultaneously.

4. You can connect it with upto 8 Laptops/PC for effectiveness and speed compare to our other means of Internet where we pay upto N15k on monthly subscription and you can use 3 System at a go..

5. You can make cool money connecting for others and you don't need to be a Guru to know how to configure laptop or desktop to Access Cable Internet.

::: The End! :::

Hi my people. Mtn free-call to any Network is out oh. Rush and get info on how to get ur own. Ths is a bomb. U can make calls for 24hrs in a day with 0.00naira on ur phone. This is not a Magic number shit.
Just send me ur number jare on my box if u wish to......
[You must be registered and logged in to see this link.]. Am the best

Hmmm. I tot we give all out here.aint it y this forum is created?we are to help ppl.let evry gain 4rm this post if u have anythinh to offer

if want to give out post it here, and why should people send their number

Pls how can i connect my pc 2 my dstv decoder via usb cable for browsing the net

Abeg guy can u get the materials for us if we pay u.........

Pls how can i connect d decoder to my pc via usb cable for browsing the net. Tanx in advance

Any testimonies @ all?

Connection Requirements and
Overview
Connection Requirements
SPLITTER
LINKSYS CABLE MODEM
RJ – 45 NIC Cable
Ethernet Cable
Router(WIRELESS OR WIRED if
you intend to use more than
one pc)
DECODER(mytv, hitv, dstv,
daarsat etc)
Coaxial to RJ-45 converter or
adapter
COAXIAL CABLES
Overview
SPLITTER
There are many types of
Satellite Decoder Splitter, you
buy your favorite at the shops
where it ’s been sold What do
we use the Splitter for? This
enables you to create a parallel
connection for the coaxial
cable (this is the cable that is
used to connect your decoder
to the TV and as well as the
decoder to the Dish hanged
outside).the splitter will share
the signal that comes from the
dish outside between the TV
and the Router cable modem,
which will convert the signal to
an internet signal
LINKSYS CABLE MODEM
Definition of a Cable Modem: A
cable modem is a device that
delivers high-speed Internet
connectivity via a cable
television company which
serves as the Internet service
provider (ISP). A cable modem
requires a subscription to
cable Internet service, and will
not function by simply
connecting it to a cable TV
(CATV) feed. Externally, a cable
modem resembles a DSL
modem. The coax cable that
brings in the digital CATV
signal provides a channel for
upstream and downstream
Internet service. This does not
interfere with television, as
there is plenty of "real estate"
or bandwidth space on the
coax cable to handle both TV
and Internet signals. Why
Linksys Cable Modem: The
Linksys Cable Modem does not
require you to pay any
additional separate monthly
subscription to the cable
company, you only need to
connect it with your current
subscription with your satellite
cable TV provider which will
only work with a Coaxial Cable.
RJ – 45 NIC Cable
This is a typical networking
cable which we will use to
network all the network
devices that we have listed
above such as the Router
(Cable Modem), we will use it
to make a connection from the
Router to the computer to
transmit internet.
Ethernet Cable
Ethernet cables connect
network devices such as
modems, routers, and
adapters. They transmit data
using the Ethernet protocol.
Most Ethernet cables have
RJ-45 jacks on both ends, each
with 8 pins. (They look similar
to telephone jacks, which use
4 pins or 6 pins.)
• Equipment using an Ethernet
cable is referred to as wired.
• Wireless equipment uses
radio waves in place of some
(or all) Ethernet cables. A
network device that uses both
Ethernet and wireless
connections is usually called
just wireless.
The Physical Ethernet Cables
• Use Cat 5 cables. (Cat 5 is a
measure of quality, meaning
that it supports traffic up to
100 MB / sec.) These are also
called 10/100 Base-T Cat 5
cables.
• Some Ethernet cable wires
crises-cross internally, others
are straight through, meaning
that pin 1 is wired to pin 1 on
the other end, etc. A port
(socket) for a straight through
Ethernet cable is sometimes
called an uplink port. If you
aren't sure about a cable, and
you can see the inside wires'
colors, hold the two ends of
the plugs up, so the same side
of the plug is facing you.
Router
A router is used to transmit
internet to more than 1
computer system on a
network setup, this enables
you to network your
connection to other system
(PCs). This is also known as
cable modem.
The connection runs the
incoming cable connection to
an external cable modem,
which has an Ethernet
connection to a router, which
then connects
DECODER
A decoder is a device which is
used to decode the satellite
signal receive from the satellite
dish into a video, the decoded
signal converted into video is
what we receive on our TV,
The purpose of we connecting
to the internet with a decoder
is to convert your decoder to a
Modem, a cable decoders is a
modem because it modulates
and demodulates, but it also
functions as a tuner, a
network bridge, an encryptor
etc.
To connect your PC or laptop
to a decoder to access the net,
you do not use a serial port as
with dialup modem.
COAXIAL CABLES
This connect the decoder to
the splitter and one end of the
cable goes into the TV while
the other end goes to the WAN
port of the router (Linksys
Router)
Things to take Note before
buying all the equipments
required for setup:
• I always recommend
running a router between a
cable modem and a PC because
a router not only allows more
than one PC to be connected,
but also provides a robust
hardware firewall that helps
shield your PC(s) connected to
it from internet – based
attacks.
• You can directly connect PCs
to a cable decoder using USB; I
do not recommend that option
because it precludes using a
router (cable modem)
• Some cable modems have a
built – in router, in which case
you don’t need to purchase a
separate one. If your computer
doesn ’t include an Ethernet
adapter built into the
motherboard or a separate
Ethernet card, you can install
an Ethernet card into an
available internal expansion
slot or use a USB – based
Ethernet adapter instead. I use
a USB - based Ethernet adapter
on my HITV decoder.
• The cable modem connects
to the CATV network using the
same coaxial cable connection
as your cable TV.
The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from
your dish to your satellite
decoder splitter( i.e the “in” part)
and then connect one cable from
the first “out” port to your
decoder and the one from the
second port to your Linksys
modem; the cable can be
purchased from any shop where
they sell cable
decoder while one of the other
coaxial cable cords is connected
to your television to watch
satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable
cord from the splitter to WAN
port of your router (Linksys
Router)
Step 3
Coaxial Cable cord
If your cable modem does not
have an inbuilt router facility, you
will need to connect your cable
Modem to the CATV network of
your router using the same
coaxial cable connection as your
TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from
the router to your computer
system, which can stand as a
client if you are using only one
computer or server if you are
networking more than one
system, make sure that your
computer has an inbuilt Ethernet
adapter on the Motherboard or a
separate Ethernet card, you can
also install an Ethernet Card into
an available internal expansion
slot or you can alternatively use a
USB – Based Ethernet Adapter
instead. In our connection we
use a USB –based Ethernet
adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router
there are several ports, port 1 – 4
Stand as the LAN(Local Area
Network) Port which can be used
to connect 1 -4 CPU to the router
with an RJ -45NIC Cable, in most
cases the cables comes with the
router when you purchase it.
Connect 1 -4 CPU to the LAN Port
of the router with your RJ -45
Cables, please don ’t mistake it
with the Ethernet cable, as is only
to be used to connect the
computer which is the server to
the Router for network routing
and also note that each of the
CPU that connect to the Router
LAN Port with the help of RJ-45
must have an inbuilt Network
card install in them, while the
server should have an Ethernet
card adapter install on the board
as mentioned earlier.
Step 6
The fifth port of the Linksys
Router which stand as the WAN
Port (Wireless Access Network)
Connect the second coaxial cable
that comes from the splitter to
the WAN Port of the Router, but
note that you need a converter
which is an adapter that convert
the coaxial cable to RJ -45 cable
since the Router WAN port does
not have a direct port for a
coaxial cable
Step 7
The sixth port of the Linksys
Router which is called the
UplinkPort, the port can be
connected to a Hub or a Switch
to enable additional users or
computers within the network
range to share with the internet
of your decoder via wireless
access
System Configuration Steps
1. Start up your computer that
we call the server, and click on
the start button and then click on
control panel
2. Click on Network connection
from the control panel tab
3. Click on Create a new Network
connection from the Network
Connection from the control
panel tab
4. Select the Connect to the
Internet Radio button and then
click on Next button
5. Select the Choose from the a
list of Internet Service providers
[ISPs] radio button and click on
Next button
6. Finally Click on Finish button,
Then the connection will then
come up
7. Open up your Internet
Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility
(1) Windows Operating System
(2) Linux Operating System
What can this Internet
Technology be used for? (1)
Personal Usage
(2) Group Usage in an
Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email
Service and Internet Calls
Benefits of using this Technology
(1) Pay only monthly subscription
for your cable TV and it covers
the Internet Bill (2) Browse with
a very fast internet speed of 4
mbs download speed
(3) Connect large number of
Computer systems with the help
of a Network devices
(4) Connection configuration is
simple and easy
(5) You can watch Cable TV while
browsing the internet at the
same time without conflict
(6) No downtime for internet
connection except if your
subscription as elapsed, or one
of the connection devices gets
faulty.
(7) You can buy two decoders to
setup a mini cyber café and cable
TV football center at the same
time

Has no 1 tried dis stuff? pls we need updates

3 people have confirmed but i dont really know for myself how they got it cos there are other hardware accessories needed.

I have aquick question JB, is the Splitter the same as the Diseqc?

i have done some research on it. the only thing is that the materials needed are expensive and difficult to get in nigeria

prettyddd wrote:

I have aquick question JB, is the Splitter the same as the Diseqc?

yes its just like it

prettyddd wrote:

3 people have confirmed but i dont really know for myself how they got it cos there are other hardware accessories needed.

can u verify how they go about it.

Hmn

Abdullahi wrote:

Hmn

is this a way to increase numbas of post.

Just tested dis stuff in an old-friends place and men d speed is quite impressive. Guys u need to check it out!

Drdanskills wrote:

Just tested dis stuff in an old-friends place and men d speed is quite impressive. Guys u need to check it out!

Can he share with you where exactly he got the coaxial cable and the converter for the RJ45 please? Its about time things were really experimented and not just read in this forum.

Let us Know more about it,is it possible? what are the accessory? abd besides how are we goin to proceed

@thread owner, plz how much will all these expenses cost us.
thks

@ All, u can get ur materials cheap @ computer village Ikeja.
Motorola surfboard cable modem goes for btw 15-25k, D RJ-45 cable is about 3.5k, d rest is just peanuts. Coaxial cable is dsame with d normal satellite cable we all use naw!
It all depends on ur bargaining power, so bargain wella.

If u want to supply other members of ur family or nearby neighbours, u'll definately need a wireless router, u can get Linkserve router. Am not too sure of d current price but is around 9k.