Flashing a phone with USB cable

THE FOLLOWING ARE THE SOFTWARES YOU NEED TO
DOWNLOAD TO GET STARTED: you can google them
a. Navifirm - to download the phone's firmware
b. Phoenix Service Suite
c. Nokia PC Suite
d. A good USB cable
1. Install Phoenix. This might take a pretty long time if you're using a
slow computer but you've got to be patient
2. Run Navifirm but be sure to have a working internet connection
before doing this. It connects to the internet and loads all available
Nokia phones firmwares. This too also takes a long time and requires
a steady internet connection so you need some patience here too.
3. Be sure your phone's battery is charged to at least 50% though
flashing should take less than 10 minutes.
4. Select your phone type under Products. It is located on the phone
just beneath the battery. For example, N97's product type is RM-505,
RM-133 for N73 and RM-596 for Nokia N8. (You can as well check it by
dialling *#0000# in standby.)
5. Wait till it loads Releases. From here, you can see all available
firmware versions. Select the latest you find there.
6. It now loads Variants, select your desired product code from the
list. You can also check beneath the battery to find the original product
code.
7. Now select all the files and download. Select Download with IDMM
(Internet Download Manager) if you have it installed it on your PC. If
not, select, Download with program and choose the destination
folder.
8. Go to C:/Program Files/Nokia/Phoenix/Products
Create a folder with the name as your phone product type.
For example, for Nokia N97, the folder will be named RM-505
The firmware files you downloaded will then be located in C:/Program
Files/Nokia/Phoenix/Products/RM-505
9. Now run PHOENIX and connect your mobile phone in PC Suite
mode. If phoenix detects your phone automatically, skip steps 110-14.
10. In Phoenix, click File > Manage Connections > New.
11. Now select the type of cable you are using. If you are using DKE-2,
CA-53, Micro USB cable, select USB.
12. Click Next. It will find your product and say FOUND. If it doesn’t
find any, you can try changing your cable type by clicking Back.
13. Click Next and then Finish.
14. Now your cable type (USB) appears in the connection list. Select it.
Click APPLY and then CLOSE.
15. Now select File > Open Product.
16. A list of RM codes will open. Select your phone’s RM code.
17. Now select File > Scan Product.
18. Your phone’s firmware info will appear at the extreme bottom
of the Phoenix Service Software window.
19. Now select Flashing > Firmware Update. At this point, Phoenix will
automatically load the firmware files we talked about in step 8. If it
doesn't, make sure you named that directory accordingly and please
go over step 8 again.
20. If everything up to step 20 goes well, select “Refurbish�, wait
until the “Successful� dialog box appear (DO NOT touch or
disconnect the phone or USB cable during the process). Press OK,
phone will disconnect and restart.
At the end Phoenix will tell you to disconnect your phone as the
flashing has finished butome phones may not boot up automatically
after the flashing has finished. In those cases, remove the battery and
then insert it and manually start the phone.
FLASHING A DEAD PHONE WITH PHOENIX
The procedure is almost same as above but with litle differences.
1. Start Phoenix. Connect your phone through USB Cable (we are
flashing a dead phone so the phone is off)
2. Click File > Open Product. Select your RM code from the window
that appears. Click OK.
3. Click File > Manage Connections. Select No Connection. Then APPLY
and CLOSE.
4. Now select Flashing > Firmware Update.
5. Check the option “Dead Phone USB Flashing�.
6. Click Refurbish and the flashing process is started.
7. After some time, flashing will pause asking you to turn on your
phone.
8. Press the POWER button of your phone until the backlight comes
up.
9. Flashing will proceed. Your phone will automatically start when the
flashing finishes. When done, you can safely remove your data cable
from handset.

you are 10much.

Tanx man

9ICE ONE

Good job

interesting thanks guy, 1luv

kul....you can do better making it more easy to undastand you know....tanx man

just ask what you dont understand in the whole process of the flashing so we can know how to make it clearer for you

thanks man. I lost my Nokia C2 -01 code security. the master 12345 don't work with and i want to know if there another master code i can use to change lost one. Thanks

I hail u.

Pls i need ur help guys, i switched off my phone in order to insert anoda simcard after having done that i switched it "on" again unfortunately it showed and NOKIA then displayed time nd date then switched off again since yesterday that is what it was doing, pls what could be the problem and hw can it be solved? It is nokia c1-01 thank u all.

SULEIMAN01 wrote:

Pls i need ur help guys, i switched off my phone in order to insert anoda simcard after having done that i switched it "on" again unfortunately it showed and NOKIA then displayed time nd date then switched off again since yesterday that is what it was doing, pls what could be the problem and hw can it be solved? It is nokia c1-01 thank u all.

its a software malfunction, u have to flash it to restore its memory

Pls show hw to flash phone with custom firmware thanks.

u nid the nokia loader as well as firmware for the nokia model

load jaf emulator nd connect a jafbox then connect ur usb cable to usb port run the jafemulator then choose usb in option dnt tink u can und without field exp just gv it to engr in comp 4 500naira to reflash or tk to nokia if bought new is free.

Gsamcolee wrote:

Pls show hw to flash phone with custom firmware thanks.

Download Nokia suite: [You must be registered and logged in to see this link.]
i think you can get it in english

installs and launches the application Nokia suite. connect your phone and follow the instructions. Click on the penultimate icon (arrow shaped) above. on the page that appears, you will see down the name of your phone and "reinstall". click on "reinstall" and wait until the process.

007 wrote:

SULEIMAN01 wrote:

Pls i need ur help guys, i switched off my phone in order to insert anoda simcard after having done that i switched it "on" again unfortunately it showed and NOKIA then displayed time nd date then switched off again since yesterday that is what it was doing, pls what could be the problem and hw can it be solved? It is nokia c1-01 thank u all.

its a software malfunction, u have to flash it to restore its memory

Thank you sir.