Manual Method:
NEEDED SOFTWARES:
1. Download Navifirm:
[You must be registered and logged in to see this link.]aa3z1qq9yhvvgab
2. Download J.A.F:
[You must be registered and logged in to see this link.]3. Download PKEY:
[You must be registered and logged in to see this link.]1xigitql461bptf
Use JAF Emulator/PKEY in compatibility mode to avoid any
missing JAF error in Windows 7.
VIDEO TUTORIALS FOR DOWNLOADING AND FLASHING
FIRMWARE
FILES
[You must be registered and logged in to see this link.]STEPS:
1. Download your f/w files from Navifirm
2. Place all files in C:\Program
Files\Nokia\phoenix\products\RM-XXX\
(RM-XXX means your RM. It may be RM-356, RM-428 etc. If
your RM is RM-356; Then make the folder as 'RM-356')
3. Download and Install PKEY Emulator and J.A.F
4. Download the CFW
5. A CFW usually contain 3 or 2 files (Rofs2 + Rofs3 + UDA)
6. If the filenames do not match then rename the names of
the
CFW files to your original f/w files
7. backup your firmware files
8. Then replace your original files with the CFW files in
"C:\Program Files\Nokia\phoenix\products\RM-XXX\"
9. Run PKEY Emulator
10. Click OK on the dialog that appears, then When J.A.F will
start
11. Go to 'bb5'tab
12. Make it look exactly like the picture below
(Tick - Manual Flash, Dead USB, Normal mode) (Untick - 'CRT
308')
13. Make sure the scene is exactly the same (Check nicely)
14. Tick 'USE INI'
15. Then a list will appear containing all phone models
by ROTMANLUV 2023-07-08, 17:34
