multi tv update

First topic message reminder :

Multi tv has updated, this are new frequencies, 12526v 27.000 and 12559v 01.563

any software for multi TV decoder

No

tetteh wrote:

Multi tv has updated, this are new frequencies, 12526v 27.000 and 12559v 01.563

update 4 wat, and wat about 12559 v 01.562?

Or 12522

Nice

good morning my peepz, i have an issue in installing multitv for a client yesterday. i got abt 78% strength bt d signal kips flunctuating at abt every 3mins intervals. At times it will drop to as low as 40%. then i bliv it will b a problem frm my outdoor unit. i hammered d dish firmly n tighten all screws bt d problem persist. i gt confused so i decided to track devil TV for a test. i gt 79% & its stable without any slight flunctuation for abt 10mins. Ds make me bliv dt d outdoor unit is firmly installed. I left d place n promise to continue today. Gurus pls help me out!

Advans wrote:

good morning my peepz, i have an issue in installing multitv for a client yesterday. i got abt 78% strength bt d signal kips flunctuating at abt every 3mins intervals. At times it will drop to as low as 40%. then i bliv it will b a problem frm my outdoor unit. i hammered d dish firmly n tighten all screws bt d problem persist. i gt confused so i decided to track devil TV for a test. i gt 79% & its stable without any slight flunctuation for abt 10mins. Ds make me bliv dt d outdoor unit is firmly installed. I left d place n promise to continue today. Gurus pls help me out!

Anoda amazing drama i also encountered ws dt i pressed 8280 to enter new biss code for tv3 bt d 4669xii decoder didn't show anything. i pressed 6969 to turn on patch bt d decoder gv nothing. pls i nid help on ds two issues

Advans wrote:

good morning my peepz, i have an issue in installing multitv for a client yesterday. i got abt 78% strength bt d signal kips flunctuating at abt every 3mins intervals. At times it will drop to as low as 40%. then i bliv it will b a problem frm my outdoor unit. i hammered d dish firmly n tighten all screws bt d problem persist. i gt confused so i decided to track devil TV for a test. i gt 79% & its stable without any slight flunctuation for abt 10mins. Ds make me bliv dt d outdoor unit is firmly installed. I left d place n promise to continue today. Gurus pls help me out!

Check ur connections to the lnb and to the decoder, if they are taut, then delete the channels and do a blind scan. If the problem persist, restore factory setting and start all over. If still no result, install the latest software.

Advans wrote:

Advans wrote:

good morning my peepz, i have an issue in installing multitv for a client yesterday. i got abt 78% strength bt d signal kips flunctuating at abt every 3mins intervals. At times it will drop to as low as 40%. then i bliv it will b a problem frm my outdoor unit. i hammered d dish firmly n tighten all screws bt d problem persist. i gt confused so i decided to track devil TV for a test. i gt 79% & its stable without any slight flunctuation for abt 10mins. Ds make me bliv dt d outdoor unit is firmly installed. I left d place n promise to continue today. Gurus pls help me out!

Anoda amazing drama i also encountered ws dt i pressed 8280 to enter new biss code for tv3 bt d 4669xii decoder didn't show anything. i pressed 6969 to turn on patch bt d decoder gv nothing. pls i nid help on ds two issues

Most likely you used a tp with higher or lower frequency or sr...use 12522v27000, and see wha happens.
About those codes, they dont work with some original decoder softwares packaged from factory. So you gotta update the box with a downloaded stb patch from crosat or persiangig. After that, 6969 and the other codes will respond.

heavenboundpkay wrote:

Advans wrote:

Advans wrote:

good morning my peepz, i have an issue in installing multitv for a client yesterday. i got abt 78% strength bt d signal kips flunctuating at abt every 3mins intervals. At times it will drop to as low as 40%. then i bliv it will b a problem frm my outdoor unit. i hammered d dish firmly n tighten all screws bt d problem persist. i gt confused so i decided to track devil TV for a test. i gt 79% & its stable without any slight flunctuation for abt 10mins. Ds make me bliv dt d outdoor unit is firmly installed. I left d place n promise to continue today. Gurus pls help me out!

Anoda amazing drama i also encountered ws dt i pressed 8280 to enter new biss code for tv3 bt d 4669xii decoder didn't show anything. i pressed 6969 to turn on patch bt d decoder gv nothing. pls i nid help on ds two issues

Most likely you used a tp with higher or lower frequency or sr...use 12522v27000, and see wha happens.
About those codes, they dont work with some original decoder softwares packaged from factory. So you gotta update the box with a downloaded stb patch from crosat or persiangig. After that, 6969 and the other codes will respond.

Give it a try, if you are still unable to get solution, may be I can give you an alternative idea. Good luck.

tnx alot, i actually used 12525v27000. im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

Advans wrote:

tnx alot, i actually used 12525v27000. im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

heavenboundpkay wrote:

Advans wrote:

tnx alot, i actually used 12525v27000. im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

pls watz amos 5 tp?

pls watz amos 5 tp?

Advans wrote:

pls watz amos 5 tp?

10804H30000

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie. i went wt my own decoder. i used 12522v27000 on both decoders bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished, i gt tired sweating like ileya ram. we later resumed arnd 7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing. na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons? im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually a rocky low land area in akure environ.

Good job here

heavenboundpkay wrote:

Advans wrote:

pls watz amos 5 tp?

10804H30000

tnx bro, so i can use selotape to attach it to my dish which already hs multitv signal on d main lnb ryt?

Advans wrote:

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie.  i went wt my own decoder. i  used 12522v27000 on both decoders  bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished,  i gt tired sweating like ileya ram. we later resumed arnd  7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing.  na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons?  im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually  a rocky low land area in akure environ.

u should have changed d lnbf product

Advans wrote:

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie. i went wt my own decoder. i used 12522v27000 on both decoders bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished, i gt tired sweating like ileya ram. we later resumed arnd 7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing. na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons? im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually a rocky low land area in akure environ.

ku no dey get prob 4 sun, na c-band

Hmm wats d update on dis multi tv

007 wrote:

Advans wrote:

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie.  i went wt my own decoder. i  used 12522v27000 on both decoders  bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished,  i gt tired sweating like ileya ram. we later resumed arnd  7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing.  na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons?  im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually  a rocky low land area in akure environ.

u should have changed d lnbf product

i did dt too bt same result. tnk God its ok nw. i rlly appreciate everybody's contribution.

007 wrote:

Advans wrote:

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie.  i went wt my own decoder. i  used 12522v27000 on both decoders  bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished,  i gt tired sweating like ileya ram. we later resumed arnd  7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing.  na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons?  im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually  a rocky low land area in akure environ.

u should have changed d lnbf product

i did dt too bt same result. tnk God its ok nw. i rlly appreciate everybody's contribution.

So which frequency did u used in nailing d multi tv recently

Advans wrote:

007 wrote:

Advans wrote:

007 wrote:

Advans wrote:

heavenboundpkay wrote:

Advans wrote:

tnx alot, i  actually used 12525v27000.  im gonna try 12522 den upgrade d software later today. im gr8ful. gt bk 2 u soon.

No problem man, im waiting..goodluck

can i hang 2nd lnb on d dish to track mytv. hp mytv tp is 12550v19525

dat is not a mytv freq dat is old multitv freq. n u cannot hang a second lnb to get mytv along wit multitv but u can do so for dstv and amos 5 along

today na season two of d movie.  i went wt my own decoder. i  used 12522v27000 on both decoders  bt d prob persist. i relocated d dish bt al na same. i decided to track dstv again, d signal remain constant at 80%. i returned to 28.2E den flunctuation started again, occasionally it goes as low as 45%. In d process, d gen fuel finished,  i gt tired sweating like ileya ram. we later resumed arnd  7pm.i jst power up d decoder n d signal started dancing btw 65-75% bt no more freezing.  na so i pack my load n run 4 my dear life. so gurus in d house, wat cud b d reasons?  im suggesting low land terrain of d area n d weak strength of multitv on sunny day. d place is actually  a rocky low land area in akure environ.

u should have changed d lnbf product

i did dt too bt same result. tnk God its ok nw. i rlly appreciate everybody's contribution.

Good for you man...enjoy

Two days ago I had signal on My big dish. The party started again. Everything was right. The right symbol rate was coming when blind scanning , 27000. but yestady and 2dy no signal. I beg I love dis mult-tv. do somethin to make it stable againo as.

Try symbol rate 27042

Thanks, They have boosted the signal once again. I am to signal stable now. Thanks MULTI-TV.

Thanks, They have boosted the signal once again. I am to signal stable now. Thanks MULTI-TV.

Better

Thx guy.

Thx guy.

ETV GHANA NO AUDIO NO VIDEO

[quote="HORIZONTAL"]ETV GHANA NO AUDIO NO VIDEO

yeah, will be back after worldcup

pk now

Verysoon it w back

Femwal wrote:

Verysoon it w back

You work with multitv?

heavenboundpkay wrote:

Femwal wrote:

Verysoon it w back

You work with multitv?

lolz

Pls house my multi tv keeps freezing evey 3mins as if is cracking and my frequency signal quality is 82. Is it general problem pls?

michealblakky wrote:

Pls house my multi tv keeps freezing evey 3mins as if is cracking and my frequency signal quality is 82. Is it general problem pls?

Yeah! General Wahala

Multi tv freezing

mine not freezing

please house help me confirm this. I don't knw if my lnb is faulty. For over a week now of two weeks my joy tv keeps cracking and at time show know or bad signal and cums bak again by it self. I v re wired evertin again bcos of this and scatter my dish to search for signal again thinking mayb d wire is faulty of breeze has shaked it but after all dis, still the same thing. Please it it general problem from multi tv that it cracks and removes signal and cum bak again every 5mins or mayb my lnb has been spoilt by lightening from thunder? I need sumone to tell me if he experience d same or mayb i change lnb..

No crackn here...very stable

Hello, just make sure your dish is adjusted to receive 28.2 degrees east and with multi TV satellite frequency and symbol rate. If problem persists change your lnb. If problem is still there change satellite cable used for installation. Good luck.

Change Ur diseq switch. Do not place Ur computer/laptop or phone near d decoder when they are on, they interfer with multi tv signal only

D guy didn't respond to ur corrections and .ℓ̊ think d conversation is over